All duty version Auto Air Condition Leak Detection Tools Leak check / plugging / testing Connector Repair Kit RXYS-84

Bullet Points:
1、Quick Check: 12 Kinds of plugs of different sizes. 10 kinds of different sizes of buckles. It can perform segmented leak detection on compressors, cooling pipe networks, pipes, and evaporators, and can quickly and accurately find leaks.
2、Widely Use: Air conditioning hose leak detection, oil pipe leak detection tools, evaporator, condenser leak detection.
3、Multi-purpose Leak Test: Suitable for flushing adapters of more than 80% of air-conditioning systems on the market.
4、Segment Leak Detection: The compressor, cooling pipe network, pipeline, and evaporator can be segmented for leak detection, and the leak can be found quickly and accurately.
5、Wide Range of Applications: The kit is a few independent components used to clean the air conditioning and refrigeration systems for automotive testing and maintenance. It is very important to maintain your compressor and other important components to achieve the smooth operation of the system.

Description:

1.These instructions are intended as guidelines for general operation of the Universal Flush Fitting Kit. Follow the vehicle manufacturer's instructions for flushing A/C systems.
2.The clamp assemblies and support plates included in this kit can be installed on most A/C line or tube ends for attachment of the flushing apparatus being used.
3.The support plates are slotted to allow for different size tubes or line nuts to be supported against the lower end of the sealing clamp. The chamfered area on the support plates allow the flared end of the tubes to sit level. This way the sealing cone can be seated without slipping or damaging the end of the tube.
4.Seating of the sealing cone into the fittings or tube ends does not require the use of wrenches or other tools. Sealing cones damaged by tools must be replaced.

Features:
Using our air conditioner repair tools, you can repair your car air conditioner by yourself, saving the time and money of the auto repair shop.

Specification:
Name: General 26-piece Set of Auto Air Conditioning Repair Tools
Material: PA+Aluminum
Color : as pic shown
Size: about 36*26*7CM/14.17*10.24*2.76in

Packing List:
Air Conditioner Leak Detector Tester Tool*1

Note:
Installation of the Sealing Cone:
1. After selecting the correct support plate to fit the tube or line fitting, tighten the clamp screw until the cone is seated tightly against the end of the tube or line fitting on the A/C component.
2. While holding the clamp screw by hand, rotate the forcing nut an additional 1/8 to 1/4 turn. This provides a leak-tight seal for the flushing operation.
3.To remove the clamp assembly, hold the clamp screw and back off the forcing nut to free up the sealing cone without damaging the end of the cone.
4.When using adapters on a tube or fitting that is too small for the sealing cone to enter, replace the cone-shaped seal with the concave seal.
5.To replace the sealing cone, hold the forcing nut and back out the clamp screw until the cone is pulled out the end of the clamp screw. Insert the desired sealing cone into the end of the clamp screw, and tighten the screw until the cone bottoms in the screw, using the non-slotted support plate against the end of the cone.
6.CAUTION: Do NOT use pliers or other tools to twist the sealing cone out of the clamp screw, because it could damage the sealing cone.

Others:

1.Due to the lighting effects and shooting angles, there is color difference in the product, please understand.

2.Due to manual measurement, there is a tolerance in the product size.