Needfitting.com teach you How To Order Adapter

Hydraulic adaptors code name description

1.Straight part No.

2.Elbow part NO.:Add suffix”4”for 45 elbow and suffix ”9”for 90 elbow to the straight part number.e.g,1BG9-04OG and 1JT4 -08-06SP

3.Tee Part NO.

4.Cross Part NO.

In general for cross fitting,the four ends thread is the same.If different,the first group means left,the second group means up,the third group means right and the fourth group means down.

5.Don’t need material code if the material is carbon steel,and the code for other materials is defined as following:

6，Size code table:

Example of order:

If 1BG left end thread is G1/2”x14 and right end thread is G3/4”x14，the carbon steel fitting number is 1BG-08-12.If made of stainless steel ,the fitting number is 1BG-08-12SS

If AJJN left and therad is 9/16”x18,mid end thread is 9/16”x18 and right end thread is Z1/2”x14,the carbon steel fitting number is AJJN-06-06-08.

Hydraulic Adaptors numbering convention

1.straight adaptors numbering scheme

1. Add "OR" after the original code, which means adding O-RING on the 60°, 74, 90° outer cone, such as 1J-06-04OR, which means adding O-RING on the second end, namely -04 end cone :1J-06-04/2OR means that O-RNG is added at both ends, namely -06 end and -04 end.
2. The expression method of Swivel Female/Swivel Female (with crimp nut) is that the first digit is 7, and then S (Note: S is the first letter of SWIVEL), such as 7B-08S, 7NU-08S.
3. The representation method of Male/Swivel Female (sleeve nut) is that the first digit is 5, and then S is added at the back (Note: S is the first letter of SW small VEL), such as 5J-08-12S.
4. When the W-end welded pipe is short, add S after the code (Note: S is the first letter of SHORT), such as 3BW-08-20S.
5. For the straight pipe used for the ferrule type, it is represented by W, and P is added at the back, such as 1BW-08-18P, which means that the second end is a straight pipe, which is used for the ferrule type, not for the welding type.
6. When the size of the welded pipe is inch, add IN after the code, such as 5JW-08N, 3JW-12SN.
7. Add N to the original code for male hexagonal plug, such as 4TN-08, 4NN-08, 4BN-08, 4ON-08, etc.
8. For the adaptertype sealed with CAPTIVE, add WD after the code, such as 1B-08-12WD, indicating that the second end, the -12 end, is the CAPTIVE sealing type: 1B-08-12/2WD, indicating -08 and -12. Both ends are CAPTIVE seal type.
9. For the J-end lengthened transition adapter, add L after the code, such as 1JO-08L.
10. Add G after the code for the meter connector, such as 2TB-08G.
11. Add OG after the code for the adapter, such as 1JG9-08-10OG, AJOJ-08OG, etc.
12. For the T-end adapter, which needs to be processed with a 60° inner cone surface, add SP after the code, such as 1BT-08SP.
13.24° with O-RNG cone sealing adapter, such as using GB standard O-RING, add GN after the code.

2、Numbering rules for corner bend transition adapters:

Add "4" after the straight-through transition adapter number to indicate a 45 bend transition adapter, and add "9" after the straight-through transition adapter number to indicate a 90° bend transition adapter.

3、Tee adapter numbering rules:

The meaning of the first letter is as follows, and the meaning of the remaining letters is the same as the second or third letter in the straight-through transition adapter.

A Male/ Male/ Male

B Male/Swivel Female/ Male

C Male/ Male/Swivel Female

D Swivel Female/Swivel Female/Swivel Female

E Swivel Female/ Male/Swivel Female

F Swivel Female/Swivel Female/ Male

G Swivel Female/Swivel Female/Swivel Female

H Swivel Female/Swivel Female/ Male

J Swivel Female/ Male/ Swivel Female

K Male/Swivel Female/ Male

L Male/ Male/Swivel Female

M Swivel Female/Swivel Female/Swivel Female

N Male/Swivel Female/Swivel Female

P Swivel Female/ Male/ Swivel Female

Q Swivel Female/Swivel Female/ Male

4、 Cross adapter:

The first letter X indicates that the four ends are all Male crosses.

The first letter Y indicates that all four ends are Swivel Female spools.

The first letter Z means that all four ends are Swivel Female's four-way.

The meaning of the rest of the letters is the same as the second or third letter in the straight-through transition adapter, such as XB-08, YB-08, ZB-08, etc.